How it Works

Easy installation


When the LP tank is empty, turn the valve handle clockwise to shut off. Unmount the LP tank from the cylinder cradle and set upright on the ground.

Step 1


Slide the TRS cover onto the LP tank and position in place, aligning the holes between the cylinder and the TRS device.

Step 2


Carefully lift and install the LP tank onto the cylinder cradle so the retainer pin passes through the slot of the TRS device.

Step 3


Wearing safety gloves, reassemble the hose fitting onto the outlet valve; ensure the fitting is properly tightened.

Step 4


When the fitting is properly assembled reach through the "X" shaped opening and turn the LP tank valve on.

Step 5